If your microwave stopped heating but still turns on and runs, it could be a number of problems. The Magnetron, High Voltage Capacitor, High Voltage Diode, or a few other parts could be the culprit(s). Give us a call so we can help you get it fixed. Electro-Mechanical Service Professionals PLLC (520) 661-0030

We recently went on a service call where this fridge door icemaker was not working. We found that the freezer section evaporator coil was frozen at the top and the air duct which blows air up through the side wall of the fridge to the icemaker was clogged. We were able to get everything cleared out and back to normal.  Give us a call at Electro-Mechanical Service Professionals PLLC 5206610030

Folks we see ice makers fail all the time, but they do need proper water pressure (20-40 psi) to work. This is a video of a recent service call for a nonworking ice maker. The water pressure was almost non-existent.

We had a customer last week that had an air conditioner stop working. The unit had two simple problems. We got them up and running again! Electro-Mechanical Service Professionals PLLC Tucson’s best appliance repair company 520 661 0030

This is the main control board for a Whirlpool electric dryer. One of the main relays burned out. We were able to get this customer up and running again. Electro-Mechanical Service Professionals PLLC 5206610030 

Today we helped a regular customer get their water heater back to normal. This little guy was the culprit. 

This is a picture of the inside of a 3-year-old gas dryer. The vent duct was routed to exit the side instead of the standard rear configuration. In this case, the installation company simply taped the vent duct to the output of the blower housing. The problem was that the duct hose came loose and blew dust and lint all over the inside of the dryer. This created a fire hazard and caused the dryer to not work properly. In this case, it would heat for 4 minutes and then stop heating for an extended period of time, causing dry time to be exceedingly long.